How is Dragonfly’s new hover-in-place tethered UAV defying maritime communication limits?
DPI tethered UAV lifts communication antennas up to 500+ feet and can increase line of site communication at sea 3x, from 8 to nearly 30 miles
Robotics solutions and case studies
High efficiency converters help maximize run-time
Case study: Autonomous warehouse robot
Maximize time between recharges
Maximize time between recharges
Recent improvements in sensors and software allow autonomous robots to identify and avoid human workers or other obstacles and to travel to their destination by the shortest route, rather than being limited to defined robot pathways. These nimble robots are required to carry parts or finished goods 24/7 as a key contributor to the SMART factory, providing faster delivery and lower costs. This manufacturer of robots was looking to maximize time between recharges without impacting other performance factors. The key goals were:
- Maximize range between charges by reducing conversion losses
- Free up space for larger batteries and sensors by reducing size and weight
Efficient battery conversion into multiple rails
Efficient battery conversion into multiple rails
The power for the robot came from a 48V battery stack, which powered the motor drive directly. The power supply was required to convert the battery input to three rails of 6V and one of 12V to power the sensors, navigation interfaces and CPU. The solution was based on four arrays of Vicor PRM and VTM converters, one array for each output. Key benefits were:
- Lowest losses achieved by high efficiency conversion (>92.7%)
- Small footprint, low profile (6.7mm) and low weight
Vicor PRM/VTM solution saves space
Four PRM/VTM converter combinations provided the isolation and regulation for each output. The ability to parallel converters accommodated the output powers required (6V at 60W and 12V at 600W). Output rail power sequencing was easily achieved though configuration of the PRMs. To analyze this power chain go to the Vicor Whiteboard online tool.
The power delivery network
PRM pre- and post-transformation regulators
Input: 48V (36 – 75V)
Output: 48V (5 – 55V)
Power: Up to 600W
Efficiency: Up to 97%
As small as 22.0 x 16.5 x 6.73mm
Input: 0 – 60V
Output: 0 – 55V
Current: Up to 115A
Peak efficiency: Up to 97%
As small as 22.83 x 8.52 x 4.9mm
Resources
Resources for the design engineer
Now boarding the flight to the future, flying lower emissions Ampaire hybrid-electric planes
Ampaire is developing hybrid-electric aircraft that will lead the industry to an all-electric future with net-zero emissions and a greener future
Aerospace and defense power FAQs
A compilation of commonly asked questions about Vicor power solutions in aerospace and defense applications
Vicor delivers power conversion breakthroughs to fuel a robot revolution
OLogic incorporates advanced, integrated power modules from Vicor to ignite a new generation of mobile robots